In PVsell you can enter information about your customer's bill on the "Bill" page. Here is how to enter your customer's tariff into the Bill tab:
Standing charges are static costs you see on your customer's bill. These are charges that solar power cannot address, and may include separate circuits for controlled loads such as off-peak hot water or pool pumps.
You can enter which standing charges apply for your customer, as well as the frequency of those charges in the "Standing Electricity Charges" section of the "Bill" tab.
1. Open your project's "Bill" tab
2. The pane you specify the standing charges in is located below the "Import Electricity" section (above the "Electricity Price Annual Increase" section)
Alternatively, you can specify the standing charges in the Library of Bills
1. Enter the necessary standing charges in the respective fields
This section allows you to specify standing (fixed) charges for your customer's bill.
Use the calculator function if necessary to work out simple calculations with ease.
1.1. Access Charge
If the bill has an access charge, enter it here.
1.2. Meter Charge
If a meter charge is specified on the bill you can enter it here.
1.3. Controlled Load Charge
This is where you enter the controlled load charge from your customer's bill.
1.4. Other Standing Charges
You can enter any other fixed (standing) charges in this field.
1.5. Capacity Charges
Any capacity charges that apply for your customer can be specified here.
2. Specify the standing charge billing period for each associated standing charge
Choose over which time period each standing charge is billed (in other words, specify the frequency of those charges). You can select daily, monthly or yearly.
0 Comments